Replacing grout in a shower can be daunting, but information technology'southward a task that the average do-information technology-yourselfer tin tackle. So, how practise you supervene upon grout in a shower?

To replace grout in shower, apply a grout saw to remove the old grout, so use the new grout with a spatula. For the best results, permit information technology dry, and then apply a sealer. Just be cautious not to scratch the tile's surface during the procedure.

This post will outline the steps necessary to remove and replace the grout in your shower. I'll also provide tips on making the process equally easy and efficient as possible. So, if your grout is looking a little worse for habiliment, read on for instructions on how to supersede it with fresh grout.

Contents

  • i Step i: Assemble Your Gloves, Replacement Grout, and Grout Saw
  • 2 Step 2: Utilize a Grout Saw To Remove Grout From the Joint
  • three Step 3: Clear Out Excess Grout With Bleach and Water
  • iv Step 4: Apply the New Grout Using a Spatula
  • 5 Footstep 5: Allow 48–72 Hours for the New Grout To Dry
  • half dozen Step 6: Clean the Tiles to Remove Excess Grout
  • vii Step seven: Dry the Work Surface area With a Clean Towel
  • 8 Footstep eight: Apply Grout Sealer and Allow Information technology Dry
    • 8.1 ● Actress Tip:
  • ix Wrap Up

Step 1: Gather Your Gloves, Replacement Grout, and Grout Saw

The first pace when replacing grout in your shower is to gather the necessary supplies. In this instance, you'll need the following tools:

  • Rubber gloves
  • Grout
  • Grout sealer. This will help protect the new grout from h2o damage and mold growth.
  • A grout saw. This is a specialized tool that'south designed for removing grout from joints. Yous can discover ane at your local hardware store or online.
  • Make clean towel. Ensure that the grout is dry and debris-free to avoid scratching the tiled surface past wiping it down.
  • Bleach and water . Regular household bleach is fine.
  • Putty knife
  • Annoying pad

Footstep 2: Use a Grout Saw To Remove Grout From the Joint

Once you have all of your supplies ready, it's time to go to work. The side by side pace is to remove the old grout from the joints using a grout saw.

Here are the steps to follow when using a grout saw:

  • Step 1. Protection: Put on your rubber gloves to protect your hands from the grout (it'south alkaline and may dry the skin).
  • Pace 2. Cut the grout: Identify the grout saw at the border of the tile articulation, and then use a dorsum and along motility to cut through the grout.
  • Step 3. Do not scratch the tile: Exist careful not to scratch the tile'due south surface as you practise this.
  • Pace 4. Continue: Repeat steps ii and three until all of the onetime grout has been removed from the joints.

Step iii: Articulate Out Backlog Grout With Bleach and Water

Once the old grout has been removed, it'due south time to clean out any leftover debris. To exercise this, mix a 50-fifty solution of bleach and water in a bucket.

Then, use an abrasive pad to scrub the joints clean. This will besides kill any mildew or fungus that may be present.

To avert scratching the tile'due south surface, be certain to scrub the surface gently. Pay attention non to employ also much pressure as y'all scrub.

Step 4: Apply the New Grout Using a Spatula

Now that the joints are make clean and debris-free, you can use the new grout. To do that, follow these steps:

  • Footstep i. Add some grout: Scoop some grout onto a spatula and spread it into the joint.
  • Footstep 2. Repeat: Echo step one above until all the joints have been filled with grout.

Annotation: Don't worry if some grout gets onto the tile'southward surface. You can remove information technology later.

Step 5: Let 48–72 Hours for the New Grout To Dry

One time all the joints accept been filled with grout, it's crucial to allow it to dry completely earlier moving on to the next pace.

Typically, it takes 48-72 hours for the grout to dry completely. So, program accordingly and give it enough of fourth dimension to dry before proceeding.

Withal, if you lot demand to hasten the procedure, follow these tips:

  • Open the shower door or window to let air to circulate and speed upwardly the drying procedure.
  • Use a fan to help broadcast the air and speed upward the drying procedure.
  • Avoid using the shower during this time to prevent the grout from getting wet.

Pace half dozen: Clean the Tiles to Remove Excess Grout

Now that the grout has had time to dry, information technology'southward fourth dimension to clean the tiles. That volition remove any backlog grout that may exist present on the surface of the tile.

To practise this, follow these steps:

  • Step 1. Dampen the pad: Dampen the pad with clean water.
  • Step 2. Scrub the tiles: Scrub the tile's surface to remove any backlog grout.
  • Pace iii. Do not scratch the tiles: Be careful not to scratch the tile'southward surface as you do it.
  • Step iv. Repeat: Echo steps 1 and 2 until all excess grout has been removed from the tile'south surface; being conscientious not to scratch the tile.

Stride 7: Dry the Work Surface area With a Clean Towel

Once the excess grout has been removed, it'south time to dry out the work area. This will remove whatsoever moisture that may be present, allowing the grout to cure properly.

Follow these steps to dry the grout:

  • Step ane: Get the towel
  • Step ii: Wipe downwards the work area to remove any moisture.

For the best results, ensure that the towel is dry, clean, and absorptive. That way, you can remove as much moisture every bit possible.

Pace eight: Apply Grout Sealer and Let It Dry out

The last stride is to apply a grout sealer. This volition protect the grout from water damage and get in easier to go on clean in the futurity.

To do that, follow these steps:

  • Step one: Use a castor or applicator to apply the grout sealer to the joints. Be certain to rub it in well then that information technology'southward evenly distributed.
  • Step two: Allow the sealer to dry completely before using the shower.

If you need a easily-on demo of the above procedure, lookout man this video:

You lot can employ a grout pen to recolor the grout if it'due south stained or discolored. This will give your shower a brand-new await without having to replace the grout completely. In addition, ensure that you clean the shower regularly to prevent the grout from getting stained in the future.

Wrap Upwards

And that's information technology! Those are the steps yous need to follow to supervene upon grout in your shower. By following these steps, yous can quickly and efficiently supersede the grout in your shower, giving it a fresh new look.

Plus, you can rest assured knowing that the new grout will exist adequately sealed and protected from water damage. And then, what are you waiting for? Get to work and replace that grout today!