How To Rip A Shirt In Half

Download Article

Download Article

Distressed wear can add a hip, "worn-in" vibe to any outfit. All the same, clothing retailers are known to charge premiums on distressed items. In other words, wearing apparel that take been deliberately damaged may end up costing y'all more than. Why vanquish out greenbacks for an artificially distressed shirt when information technology'due south easy to make your own? Meet Step 1 below to get started!

1. one

   Grab a suitable shirt. This method uses long, sparse cuts and slices to requite your shirt a drastic "destroyed" expect. For this method, you'll want a t-shirt that y'all don't mind ruining. Preferably, the shirt should be solid-colored and carry no screen-printed design (screen prints can be tough and somewhat catchy to make clean cuts through).

2. 

   2

   Apply a pencil to trace your holes. Draw clusters of repeating horizontal or vertical lines of different lengths in an arrangement that looks appealing to you. You can make your shreds anywhere on the shirt that you'd similar, so long as they don't make the shirt completely fall apart.

   • Ane easy example is to make a cluster of horizontal cuts on the front of the shirt to produce a makeshift see-through abdomen shirt. To practise this, yous would have your pencil and depict level horizontal lines across the front of the shirt in a stylish configuration. For instance, you might get-go with curt lines, and then take them gradually grow longer and finally taper off again to brand a circular pattern.

   Advertising

3. 

   3

   Cut along your lines. Use a fabric knife or a sharp pair of scissors to brand your cuts. Endeavor to follow your lines equally closely as possible. Don't let the textile of the shirt to bunch upwards in forepart of your cutting tool - this tin lead to jagged, uneven cuts.

   • Be careful not to cutting too deeply or you may finish upwardly making cuts in the bottom layer of your shirt's fabric. To prevent this, y'all may want to put a thin piece of cardboard or plastic within your shirt equally a protective barrier.

4. 

   four

   Consider adding beads or other embellishments. Basic shredded tees wait smashing on their own, but if you'd like to personalize your shirt with boosted decorations, feel free! Employ any of the following ideas (or your own) to make your shirt uniquely yours:

   • Use gum-on decorations (chaplet, rhinestones, etc.) to requite your shirt decorative glitz.
   • Draw shapes, designs, cartoons, and more with permanent markers (be conscientious of ink bleeding - place an insert inside the shirt before cartoon).
   • If y'all know how to sew together, add a decorative fringe along the lesser of the shirt or sew together contrasting patches across the front and dorsum.

5. 5

   Habiliment your shirt with pride (and an undershirt). Congratulations - your shirt is ready to clothing! Don't forget that this shirt exposes your midriff - if you're worried most breaking the dress code at your work or school, be certain to article of clothing an undershirt!

Advertizing

1. 

   1

   Use a razor for modest scratches and worn areas. Making major cuts in your shirt is far from the only way to distress it. For example, with zilch more than a simple dispensable razor, its' elementary to make small nicks and worn patches in your shirt. Simply drag the razor across the portions you lot'd like to vesture as you would while shaving.

2. 

   2

   Utilise scissors for small holes near the seams. Another way to make your shirt announced naturally worn is to replicate the patterns of wear and tear that are common on bodily worn-out shirts. The seams in any piece of habiliment are natural points of wear, and so tears and cuts in these areas volition await especially natural. Fold your shirt along the seam, so use a sharp pair of pair of scissors to make pocket-sized cuts parallel to the seam. For an authentic look, try making multiple cuts of varying sizes. Below are a few ideas for locations for your cuts:

   • Along the seam effectually the neck hole
   • Along the seam at the lesser of the shirt
   • Forth the seams at the ends of the sleeves

3. 

   3

   Employ a cheese grater for many small holes. To give your shirt a pattern of small rips and holes, use an everyday cheese grater. Stretch the cloth of the shirt as you grate it to ensure the sharp "teeth" of the grater can dig into the fabric of the shirt. You may find this easiest to exercise if you secure the grater to a sturdy mail service or pole kickoff, then rub the shirt against it vigorously.

4. 

   iv

   Use sandpaper to wearable any screen press. One of the biggest difficulties when it comes to distressing shirts is that it's tricky to make a shirt's screen printed design look as worn every bit the rest of the shirt. The ink used for screen press is relatively thick, tough, and resistant to most distressing methods. To replicate the effects of years of wear and tear on your screen printed shirt, use a foursquare of sandpaper to abrade your screen printed design. For a natural expect, wear the design unevenly.

Advertizing

1. 1

   Take hold of a brightly-colored shirt you'd similar to brand faded. Bleach, renowned for its ability to ruin colored fabrics by turning them white, is a useful tool for distressing old shirts. In this method, a dilute solution of bleach and water will be used to simulate the dulling, fading effect that years of vesture can take on bright-colored clothing. This method is best for strong, brilliant hues (red red, traffic cone orange, and then on), but doesn't work also on nighttime shades. For obvious reasons, it'southward too unsuited for whites.

   • As always, only distress shirts that yous don't have a special attachment to. You don't want to lose a treasured shirt because yous accidentally spilled bleach on information technology.

2. 

   two

   Mix water and bleach in a 16-to-one ratio. Use a suitably-sized container (like a big plastic bucket) as a container for your dilute bleach mixture. Mix well before proceeding. Annotation that a sixteen-to-1 ratio is the same every bit the ratio between gallons and cups, so if you're using a gallon of water, you'd use 1 loving cup of bleach, 2 gallons (7.six L) of water would warrant 2 cups of bleach, and then on.

   • Yous may want to consider using a bathtub or a laundry sink to do your bleaching. These are convenient considering they allow yous to merely wash your mess down the drain when you're washed.

3. 

   3

   Add shirt(south) and stir vigorously. Information technology'southward important to ensure that the shirt (or shirts) you're bleaching receive(s) an fifty-fifty soaking of bleach. Applying more than bleach to some areas of the shirt than others can create an uneven, splotchy appearance. To counter this, offset stirring as soon as yous add together your wearable to the bleach bath and stir continuously for near 5 minutes.

4. 

   4

   Let to soak, stirring occasionally. Subsequently almost the first five minutes, yous may brainstorm to stir less oft. Be sure to monitor your article of clothing for color loss as information technology soaks. Stir every few minutes (no less frequently than every v minutes). Most shirts are set up after virtually half an hour to forty v minutes, only many may be set earlier.

5. 

   five

   Rinse and wash. When your wear has lost as much color as y'all'd like it to, remove it from the bleach bathroom and rinse it thoroughly, removing any remaining bleach. Auto wash with warm h2o and line dry out.

6. 

   six

   Alternatively, for a blotchy expect, employ a spray canteen of bleach. As noted above, the uneven, splotchy look of a poorly-bleached shirt is by and large something most will want to avoid. Notwithstanding, if you're interested in replicating this look, it's quite easy to do so. Mix bleach and h2o in a spray bottle as above, so agglomeration up your shirt with prophylactic bands. Spray the shirt in a few locations with your bleach mixture and permit it to sit for about half an hour, monitoring for colour modify. When your shirt is how yous would like it, remove the condom bands, then rinse and wash as higher up.

   • Consider adjusting the concentration of your bleach mixture for more than or less contrast. For instance, if you lot apply completely undiluted bleach, you'll go splotches of white or near-white confronting your shirt's natural colour.

Advertisement

1. ane

   Grab a low-cal-colored shirt. Essentially the opposite of the bleach method above, this method uses tea and/or a similar staining agent to make a shirt'southward colors announced darker and muddier, rather than lighter and more faded. As such, this method is best for white or light-colored shirts, though information technology has some usefulness for vibrant, brightly colored shirts, so long as they're not too darkly shaded.

2. 

   2

   Mix staining amanuensis(s) in h2o. Using a large plastic bucket or bathtub to contain your ingredients, mix your staining agents and water to create a staining bath for your shirt. The more dilute your staining bath, the less your shirt will be darkened (and vice versa). There are many possibilities in terms of potential staining agents - see below for just a few:

   • Tea
   • Coffee
   • Clay
   • Pigment (earth tones piece of work best for the "naturally worn" look)

3. 

   3

   Stir and let to steep. Add your clothing to the staining bathroom and stir vigorously. Let your clothes to soak in the liquid, occasionally checking their progress. Depending on the concentration of your staining bath, information technology tin can have anywhere from half an 60 minutes to several days for your shirt to reach its desired level of darkness, so exist sure to remain vigilant as it soaks.

4. 

   4

   Remove and soak in vinegar and water solution. If y'all have time, remove your shirt from its staining bath and identify it in a bathroom containing vinegar and water mixed in a 1-to-iii ratio. Soaking the shirt in this dilute vinegar solution helps the stain "set" in the cloth. Allow the shirt to sit down for 4 to 12 hours or as needed.

5. 

   5

   Rinse, wash and dry. Finally, remove the shirt from its bathroom and rinse thoroughly in the sink, removing any lingering staining agent or vinegar. Machine launder and dry as you normally would.

   • Congratulations! Your shirt should exist ready to wear.

Advertizement

Add New Question

• Question

  What kind of fabric is skilful for the distressed expect?

  

  Cecilia Flores

  Top Answerer

  Denim is all-time, but you tin can besides do cotton wool and polyester if you're cut patterns in it.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Fifty-fifty if they aren't the all-time, yous can still habiliment them to the pool or as a PJ meridian.

• If yous don't go it the first time, become to a shop (eastward.g. Michael'south or JoAnn'due south) to go cheap t-Shirts and continue trying till you get a perfect result!

Cheers for submitting a tip for review!

Advertisement

Things You'll Demand

• Material knife
• Pair of scissors
• T-shirt
• Pencil
• Beads, rhinestones, etc. (optional)

• Disposable razor
• Pair of scissors
• Cheese grater
• Sandpaper

• H2o
• Laundry bleach
• Plastic bucket or bathtub
• Rubber bands (optional)

• H2o
• Tea, coffee, clay, pigment, etc.
• Plastic bucket or bathtub
• Vinegar (optional)

Almost This Article

Article Summary X

To make your own distressed shirt, accept a disposable razor and drag across the portions of the shirt you'd like to distress. Finish by using a sharp pair of scissors to cut holes along the seams. Alternatively, elevate a cheese grater beyond the shirt to create lots of small holes and rips. Stretch the cloth of the shirt to ensure that the teeth of the grater digs into the material. Additionally, if your shirt has a screen printed pattern, you tin can effort using sandpaper to wear downward the ink. For more tips, including how to distress a shirt by soaking it in bleach, read on.

Did this summary assist you lot?

Thanks to all authors for creating a page that has been read 212,648 times.

Did this article help yous?

Source: https://www.wikihow.com/Make-Your-Own-Distressed-Shirt

Share this post